T-2 / K-700

T-2 Handles & K-700 Blade Tips (Consumables)

The T-2 handle series and K-700 blade series are the shared consumables for X700 / B700 thermal wire strippers: alloy + ceramic composite, anti-oxidation, anti-static and spark-free; split design — handle and blade can be replaced independently.

💡 Selection guide: wire Ø 0.15-1.22 mm, custom available — fine wire: type A; regular wire: type B; very fine / heavy (e.g. AWG16, AWG38) or special insulation: type C flat blade; special or specified apertures: custom type D.

Three standard setsCustom aperturesAlloy + ceramic compositeShared by X700 / B700

Sizing help / get a quote View Specs

T-2 Handle Specifications

Models	T-2A / T-2B / T-2C / T-2D (blade tips included, split & replaceable)
Compatible main units	X700 (handle cable 1.5 m) ／ B700 (handle cable about 1 m) — shared across both series
Handle length	130 mm
Material & process	Alloy + ceramic composite — anti-oxidation, anti-static, spark-free
Thermal performance	Grip zone stays well insulated (about 42°C) during continuous work at 600°C
Accessory	T-2-J handle stand (included with systems, for resting the handle)

K-700 Blade Apertures (three standard sets + custom)

Type A (fine, multi-hole)	0.15 / 0.24 / 0.30 / 0.38 / 0.48 / 0.61 mm
Type B (regular, multi-hole)	0.38 / 0.48 / 0.61 / 0.76 / 0.97 / 1.22 mm
Type C (flat blade)	For very fine / heavy wire (e.g. AWG16, AWG38) and special insulations
Type D (custom)	Special or specified apertures, machined to your wire size

Matching handles: T-2A (0.15-0.61 mm) ／ T-2B (0.38-1.22 mm) ／ T-2C (flat) ／ T-2D (custom apertures). Blade models K-700A / K-700B / K-700C / K-700D correspond 1:1 with handle aperture sets.

Why ZIRONX Blade Consumables

Three standard sets, or fully custom: A / B / C stocked as standard; type D machined to order for your wire gauge and insulation
Alloy + ceramic composite: anti-oxidation, anti-static, spark-free — clean strips without darkening or damaging insulation
Split design: replace only the blade when worn; the handle lasts — low running cost
One consumable range, all machines: T-2 / K-700 shared across the X700 and B700 series

Warranty

Consumables (handles / blades): 6 months. Closed-loop repair and after-sales service available.

Request a sample test / get a quote →